Our biggest Line Array

 

LX V12

Innovation

&

Design

Power

&

Performance

 

LX-V12

 

 

Extremely high power, Self-powered Class D with PFC (Power Factor Correction), three-way Line Array.
Dual LF 12” (4” interleaved sandwich voice coil) neodymium woofers with double demodulating rings, Four MF 6.5” transducers with glass fiber cones & ultra-light voice coil and two HF 1.4” neodymium magnet drivers with titanium diaphragm and individual high precision wave guide.
DSP (FIR technology) controlled with 4000W amplification, 143dB SPL, built-in inclinometer.
Specifications 
Components

LF: 2 x 12” neodymium Interleaved Sandwich Voice Coil.

MF: 4 x 6.5” neodymium Glass fiber cones.HF: 2 x 1.4” neodymium drivers with titanium diaphragm and individual wave guides.

Frequency Range 45Hz – 20KHz (- 10dB)
Frequency Response 55Hz – 18KHz  (± 3dB)
Max. SPL 140dB / 143 dB peak
Coverage Angle 100º H x V according to configuration
Power 4000 W Class D with switching power supply & PFC
LF Amplifier 2 x 1200 W
MF Amplifier 1 x 1000 W
HF Amplifier 1 x 600 W
Processing 56 bit Lynx dspb-24 with FIR filters
Control Cabinet angle detection – temperature sensor – Fan speed – Online Control
Control connections Ethernet (OCS) optional / USB (DSP programming)
AC Power 85 – 270V. 50/60 Hz with PFC
AC Connections 32A Neutrik PowerCON NAC3FC-HC
Finish Polyurea coating – white colour optional (RAL)
Material 15mm Premium birch plywood
Dimensions  378 x 1175 x 479 mm (H x W x D) without pins
Weight 74 Kg (163 lbs)

 

 

The LX-V12 is part of the LX Line Array Series. Line Array topology is employed to create cylindrical radiation, increasing throw and achieving a precise control of both horizontal and vertical dispersion. The LX-V12 is the ideal solution for application in theatres, concert halls, stadiums, auditoriums, conference halls or any event where high precision Line Array is required.
 
The LX-V12 is a very high output three-way self powered cabinet. For the low frequencies it uses dual 12” neodymium transducers with interleaved Sandwich Voice Coil (ISV) & Double Demodulating Rings (DDR). The mid range is looked after by four 6.5” transducers with glass fiber cones & ultra-light voice coil. The high frequencies use two 1.4” neodymium magnet drivers with titanium diaphragm, each with its own individual high precision wave guide. The system is powered with a total of 4000W of class D amplification, 2400W for the low frequencies, 1000W for the mid and 600W for the high frequencies. Each cabinet has a DSP integrated which applies linear phase (FIR) and classical crossovers. Other features include temperature sensor, fan speed control, inclinometer, Ethernet options and many more.
  
The LX-V12 has a selection of rugged hardware available. The SV-LXV12 flying frame can hold up to 16 cabinets with splay angles selectable in 0.5o increments between 0o to 3o and 1o increments between 3o to 12o. The CA-LXV12 transport dolly can house up to 6 cabinets and a nylon protection cover is also available. Rain hoods are also optional to protect the system electronics.
With a very high power to size ratio and with easy rigging options offered the system can be taken from the truck and rigged up in record time. It is also very easy to use and control without the need for any external amps. To extend the low frequency response, the LX-318C Cardioid sub bass is recommended.
 
Trasera LX-V12
 
 
Tri-amplified Class D with switching power supply and PFC (Power Factor Correction). With PFC the power supply regulates itself when AC mains change, so the amp power output will not change with mains swinging. The amplification far exceeds the transducers needs thus resulting in high output, high damping factor and extremely low levels of distortion.
 
 
This system is also very environmentally friendly with a reduction of approximately 40% of current draw. Includes two 1200W power modules, one for each 12” woofer, one 1000W for the four 6” transducers and one 600W power module for the HF drivers.
 
 
 

Lynx-Inclinometer_logo

DSP-Grey

Lynx ocs-icon

 

The cabinets offer built in Inclinometer, Digital Signal Processor integrated and Online Control System

Check more details

Click Here


 

 

 

Components LX-V12

 

Lf-speaker-lxv12
For the low frequencies it uses dual 12” neodymium transducers with 4” interleaved Sandwich Voice Coil (ISV), Double Demodulating Rings (DDR) for lower distortion and improved heat dissipation, weather protected cone & plates for outdoor use with onboard heatsink for improved dissipation
 
Mf-speaker-lx-v12
The mid range is looked after by four 6.5” transducers with glass fiber cones for natural sound, low harmonic distortion & ultra light weight aluminium voice coil.
 
Driver-LX-V12
The high frequencies use two 1.4” neodymium magnet drivers with titanium diaphragms increasing the life of the components, short copper cap for extended HF response. Each driver fits its own individual high precision wave guide.
 

 

Accessories LX-V12

 

BALL-PSR
BALL-PSR1020
Ball pin with thread for LX-V12 and LX-318C cabinets
CA-LXV12
CA-LXV12
Transport dolly for up to 4 LX-V12
ST-LX318CV
ST-LX318CV
Connection system to link LX-V12 with sub LX-318C
SC-LXV12-8
SC-LXV12/8
Connection system to link LX-V12 with LX-V8
SV-LXV12
SV-LXV12
Aluminium flying frame for the LX-V12
You can use this frame for ground stack or rigging of up to 24 cabinets.
Rain-Cover
FD-1LXV12NL
Rain cover for the back panel of the LX-V12
FD-4LXV8
FD-4LXV12
Nylon protection cover for either 4 LX-V12 cabinets

 

 

Hardware LX-V12

 

Enclousure-v12

 
Enclosure

The LX-V12 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with high-resistant water based black paint. 

 

Internal

Internal design

The internal structure of the LX-V12 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability.

Rearpanel

 
Rear panel

The powder coated steel rear panel contains all connections and houses the LX-V12s amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency 

Grill

 
Grill

The LXV12 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.  

Handle-LX-318C

 
Handles

An ergonomic, die cast handle with firm internal grip is located on each side of the LX-V12 enclosure to facilitate transport, positioning and loading of the cabinets.

Rigging

 
Rigging

Integrated flying plates are located on each side of the enclosure, to link LX-V12 cabinets together with optional splay angles, from between 0° to 8.5° with 0.5° step increments to create the desired curve.

Transport

 
Transport

The LX-V12 is easy to transport thanks to its dedicated Dolly. The cabinets lock in 4 points on to the dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour.

 

 

Frequency/ Phase Response

Frequency lxv12

 

Polars

 

100Hz

LX-V12@100

250Hz

LX-V12@250

400Hz

LX-V12@400

630Hz

LX-V12@630

1000Hz

LX-V12@1000

2000Hz

LX-V12@2000

4000Hz

LX-V12@4000

6300Hz

LX-V12@6300

8000Hz

LX-V12@8000

10000Hz

LX-V12@10000

12500Hz

LX-V12@12500

16000Hz

LX-V12@16000

Dimensions

LX-V12-measures

Other products from this series

LX-318C product3 x 18” transducers (2 Frontal + 1 Rear), 141 dB SPL

LX-218S product2 x 18” transducers, offering 139 dB SPL

LX-V8 product2 x 8” transducers with 2 x 1” drivers, 134 dB SPL

LX-212S product2 x 12” transducers, offering 139 dB SPL

LX-F6 product2 x 6” transducers with a 5”x1” AMT, 127 dB SPL

/* Estilos para menú plegable móvil Divi */ /* JS para menú plegable móvil Divi */