BS-118

 

 
Compact, 18” (3” voice coil) passive subwoofer cabinet in direct radiation configuration

Applications

Club & Bar installations
Sound reinforcement
Theatres
Houses of Worship
Multi media spaces
Public address

 

Specifications 
Components LF: 18” speaker, 3” ( 75 mm) copper wire voice coil, Waterproof cone with treatment on both sides
Frequency range 38 Hz – 100 Hz with preset
Sensitivity 98 dB
Max. SPL/Peak* 126 dB / 132 dB
Rated Power (AES) 600W AES (1200W program, 2400W peak)
Dispersion Omnidirectional
Nominal Impedance 8 Ω
Connectors 2 X NEUTRIK Speakon NL4 Pin connections: +1 / -1 input +1 / -1 link
Finish Polyurea coating
Material 15 mm premium birch plywood
Dimensions 533 x 660 x 570 mm (H x W x D)
Weight 33 Kg (52.9 lbs)
Fittings 2 integrated ergonomic handles, 4 rubber feets right side for vertical install, M-10 fly point
Accesories M-20 connector pole, M10 eyebolt
Enclosure type Bass reflex direct radiation subwoofer
* Calculated maximum SPL based on rated peak power and measured sensitivity

The BS-118 is a compact, passive subwoofer cabinet designed to extend low frequency support to the four BS Series full range cabinets.

The 18” (3” voice coil) driver offers high power handling and high sensitivity with low distortion and ultra low air noise. The cone is waterproof, has been treated on both sides and has been optimized for direct radiation subwoofer applications.

Constructed from premium birch plywood and coated in high resistant polyurea paint. The enclosure also offers a screw free grille together with pole mount fitting so that it can be used with any of the four full range cabinets. We recommend that the cabinet presets are applied for maximum optimization and performance.

The BS-118 features one low frequency 18” transducer with Malt Cross Technology, FEA optimized magnet circuit, ultra low air noise, MMSS technology and Weather resistant cone (treated on both sides).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories

 

TU-C02
TU-C02
M20 pole support for combination between sub and satellite cabinet
AGR-10
M-10 eyebolt

Enclosure

This cabinet is constructed from premium birch plywood (15mm thickness) and finished with polyurea coating.

Internal design

The internal structure of the cabinet is heavily braced for greater longevity and all parts are assembled on metal  inserts with metric screws.

Rear panel

Discreet, integrated rear connection speakon panel.

Grill

The cabinet has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.

Handles

An ergonomic handle is located on each side of the cabinet.

Single pole mount

M20 pole support for tripod or satellite setup with subwoofer.

 

Dimensions

 

  

 

 

 

Other products from this series

1 x 8″ transducer with a 1″ driver, 124 dB SPL 

1 x 12″ transducers with a 1″ driver, 128 dB SPL

1 x 12” transducer, 126 dB SPL

1 x 10” transducer with a 1” driver, 125 dB SPL

1 x 15” transducer with a 1” driver, 130 dB SPL

/* Estilos para menú plegable móvil Divi */ /* JS para menú plegable móvil Divi */