LX-218S

 
High power, self-powered (Class D switch mode power supply)front loaded, sub-bass cabinet with two 18″ (4″ voice coil) low frequency neodymium transducers.
DSP controlled with 3600W amplification with PFC (Power Factor Correction), 139db SPL.
Specifications 
Components 2 x 18″ (4″ voice coil) neodymium, custom Nomex cone
Frequency Range 30Hz – 200Hz
Frequency Response 35Hz – 125Hz ± 3dB
Max. SPL 136dB / 139 dB peak
Format Bass reflex, Direct radiation
Coverage Angle 360º single unit
Power 3600 W Class D with switching power supply and PFC (Power factor Correction)
Processing 56 bit Lynx dspb-22
Control Temperature sensor – Fan speed
Control Connections Ethernet (OMS) optional / USB (DSP programming)
AC Power 85V – 270V 50/60 Hz with PFC
AC Connections 16A Neutrik Powercon with link output
Finish High resistant water-based black paint – white colour optional (RAL)
Material 18mm Premium birch plywood
Dimensions 532 x 1080 x 700 mm (H x W x D)
Weight 72 Kg (158 lbs)

 

 

The LX-218S is part of the Lynx Line Array Series and is the ideal solution for application where high precision Line Array is required. This sub-bass cabinet is the ideal combination where low frequency reinforcement is needed for the LX-V8 or LX-F6.  
 
High power, front loaded, sub-bass cabinet with two 18″ (4” voice coil) low frequency neodymium transducers with nomex cones and suspension in direct radiation configuration. The transducers have ventilated voice coil and magnet circuit for improved heat dissipation. The system is powered with a total of 3000W of class D amplification and each cabinet has a DSP integrated. Other features include temperature sensor, fan speed control, inclinometer, Ethernet options and more.  
 
The rugged, light weight LX-218S offers an exceptional power to size ratio, high damping factor and low distortion with a perfectly flat response from 35Hz to 125Hz.

 Trasera_LX218S

Bi-amplified Class D with switching power supply. Includes two 1500W power modules, one for each 18” transducer.

The amplification far exceeds the transducers needs thus resulting in high output, high damping factor and extremely low levels of distortion.

 

DSP-Grey
Lynx ocs-icon
 
 
The cabinets offer Digital Signal Processor integrated and Online Control System

 

Check more details

Click Here

 

Components LX-218S

 

Speaker-lx-218s

Two 18″ (4” voice coil) low frequency neodymium transducers with nomex cones and suspension in direct radiation configuration.

The transducers have ventilated voice coil and magnet circuit for improved heat dissipation.

Transducers with neodymium magnet groups, nomex cones and suspension prolonging the life of the components.

Interleaved sandwich voice coil, weather protected membrane for outdoor use, ventilated voice coil and magnet circuit for improved heat dissipation, double spider for improved control and linearity.

  

 

 

 

 

 

 

 

 

 

 

 

 

Accessories

 

BALL-PSR
BALL-PSR0820
Ball pin with thread for LX-V8, LX-212S and LX-218S cabinets
CA-LX318C
CA-LX218S
Transport dolly for up to to 3 LX-218S
V8-218S
ST-LX218SV
Connection system to link the LX-218S with line array cabinets LX-V12 or LX-V8
KV-318C
KV-218S
4 piece adaptator kit for flying LX-218S
SV-LX218S
SV-LX218S
Flying frame for the LX-218S
Rain-Cover
FD-1LXV218SNL
Rain cover for the back panel of the LX-218S
FD-4LXV8
FD-2LX218S
Nylon protection cover for 2 LX-218S cabinets
FD-3LX218S
Nylon protection cover for 3 LX-218S cabinets

 

Hardware LX-218S 

 

Enclousure-f6

 
Enclosure

The LX-218S cabinet is constructed from 13-ply premium birch plywood (18mm thickness) and finished with high-resistant water based black paint.

Internal LX-218

 
Internal design

The internal structure of the LX-218S is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability.

Rearpanel-318C

 
Rear panel

The powder coated steel rear panel contains all connections and houses the LX-218S amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency

Grill-f6

 
Grill

The LX-218S has a heavy duty, powder coated front grille with special acoustic rear fabric to protect the transducers against dust and dirt.

Handle-LX-318C

 
Handles

Two ergonomic, die cast handles with firm internal grips are located on each side of the LX-218S enclosure to facilitate transport, positioning and loading of the cabinets.

Rigging-218S

 
Rigging

The LX-218S can be flown if chosen and comes supplied with fittings at each side so that flying plates can be added if required.

Transport LX-318C

 
Transport

The LX-218S is easy to transport thanks to its dedicated Dolly. The cabinets slip in to place on the dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour.

 

 

 

 

 

 

 

Polars

 

40 Hz

LX-218S@40Hz

50 Hz

LX-218S@50Hz

63 Hz

LX-218S@63Hz

100 Hz

LX-218S@100Hz

125 Hz

LX-218S@125Hz

160 Hz

LX-218S@160Hz

 

Dimensions

LYNX_LX-218S_2DLYNX_LX-218S-measures

 

Other products from this serie

LX-V12 product2 x 12” and 4 x 6.5” transducers with 2 x 1.4” drivers, 143 dB SPL

LX-318C product3 x 18” transducers (2 Frontal + 1 Rear), 141 dB SPL

LX-V8 product2 x 8” transducers with 2 x 1” drivers, 134 dB SPL

LX-212S product2 x 12” transducers, offering 139 dB SPL

LX-F6 product2 x 6” transducers with a 5”x1” AMT, 127 dB SPL

/* Estilos para menú plegable móvil Divi */ /* JS para menú plegable móvil Divi */