GXR-LA210P
Powered line array
The GXR-LA210P is a high output, compact bi-amp line array module. Consists of 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver.
Description
Depending on the configuration, the system is amplified with the GTX Series, 4-channel, extremely high power level amplifiers with outstanding, high efficiency. They come equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface.
Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired. Optional Networking AES67 and AES3 Digital inputs are also available.
Perfectly suited for:
| → Outdoor events |
| → Houses of worship |
| → Auditoriums |
| → Large stadiums / arenas |
| → Interior live PA |
| → Theatres |
Technical Data
| Components |
LF: 10”, 2” voice coil, Malt Cross Cooling System HF: 1.4” Exit throat, 3” voice coil with titanium diaphragm |
| Frequency Range | 55 Hz – 20 KHz (-10dB) |
| Frequency Response | 65 Hz – 18 KHz (± 3dB) |
| Sensitivity | LF: 99 dB HF: 109 dB |
| Max. SPL / Peak* |
LF: 127 dB / 133 dB HF: 128 dB / 134 dB |
| Rated Power |
LF: 600W AES, 1200W program, 2400W peak HF: 80W AES, 160W program, 320W peak |
| Coverage | H: 100ºV: depending number cabinets of array |
| Crossover | Electronic FIR filters linear phase |
| Nominal Impedance |
Low 8 Ω High 16 Ω |
| Connectors | 2 x Neutrik NL4 |
| Finish | Polyurea coating |
| Material | 15 mm premium birch plywood |
| Dimensions | 299 x 790 x 436 mm (H x W x D) |
| Weight | 29 Kg (63.9 lbs) |
*Calculated maximum SPL based on rated peak power and measured sensitivity.
More features
Hardware for GXR-LA210P
 |
EnclosureThe GXR-LA210P cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with high-resistant water based black paint. |
 |
Internal designThe internal structure of the GXR-LA210P is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. |
 |
GrillThe GXR-LA210P has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt. |
 |
HandlesTwo handles are located on each side of the GXR-LA210P enclosure to facilitate transport, positioning and loading of the cabinets. |
 |
RiggingBuilt-in flying points are located on each side of the enclosure, to link the cabinets together. The rear pannel integrates the flying hardware in order to splay angles, from between 0° to 10° with 1° step increments to create the desired curve. |
 |
TransportThe cabinet is easy to transport thanks to its dedicated dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour. |
Accessories for GXR-LA210P
 |
SV-GXR
Flying frame & stack system for GXR-LA210P/GXR-D15P |
 |
ST-SV GXR/M20
Kit to connect GXR-LA210P flying frame and M20 plate
|
 |
GXR-GSKIT
Ground stack kit to stack GXR-LA210P directly or together with the GXR-D18S |
 |
PE-SV
4 x ground stack stabilisers for GXR-LA210P
|
 |
CA-GXRLA10
Transport dolly for GXR-LA210P
|
 |
FD-GXRLA10NL
Rain cover for GXR-LA210 |
 |
FD-GXRLA10
Nylon Protection Cover for 4 GXR-LA210 cabinets |
 |
FC-GXRLA210
Flight case for GXR-LA210A
|
