XT Series

Amplifiers

The XT series is a new generation of amplifiers offering high voltage output for high headroom sound, with 64 bit double-precision 96kHz DSP processing, and an advanced power management to squeeze the last watts out of your speakers.

It also offers similar power per channel in any impedance, exceptional power sharing in asymetrical loads and a powerful and fast response cooling system.

The XT series has digital control with an extra large IPS display and touch screen panel user interface, making it easier and faster to use.

The DSP management user functionalities include input routing matrix analog, input EQ section with 8 filters and 20 memories, input EQ user section, system preset selection, a snapshot library management with up to 20 presets and master control groups.

The XT series has two Ethernet ports for daisy chain connection and access to the OCS software, designed to monitor the amplifiers in real time.

Technical Data

XT-6K

XT-10K

 Number of channels
  4 4
 Total output power
 6000 W  10000 W
  Output power  
@ 8 Omhs 4 x 1100 W
1 x 1200 W
4 x 1600 W
1 x 1800 W
@ 4 Omhs 4 x 1500 W
1 x 1900 W
4 x 2500 W
1 x 3000 W
@ 2 Omhs 4 x 1450 W
1 x 1450 W
4 x 2500 W
1 x 2500 W
@ 8 Ohms Bridged 2 x 3000 W 2 x 5000 W
@ 4 Ohms Bridged 2 x 2900 W 2 x 5000 W
Hi-Z 100V 4 x 800 W 4 x 2500 W
Hi-Z 70 V 4 x 1500 W 4 x 2500 W
 Max output voltage   
144 V peak 176 V peak
 Max output current
38 A peak 50 A peak
 Total Harmonic Distortion   
 <0.05%  <0.05%
 Voltage Gain
 26 dB to 44 dB (1 dB step)  26 dB to 44 dB (1 dB step)
 SNR    
106 dB 107.5 dB
 Required AC Mains  
Operating Voltage (50 Hz – 60 Hz) 170V – 265V AC / 90V – 140V AC 170V – 265V AC / 90V – 140V AC
1/8 Rated Power (@230V, 4 Ohms) 15 A 16 A
 Dimmensions    
 W x H x D (mm) 483×89×320 483×89×320
 W x H x D (inches)  19 x 3.5 x 12.5  19 x 3.5 x 12.5
 Weight    
 Net  8.5 Kg / 18.7 lbs  8.5 Kg / 18.7 lbs
 Protections   
 Soft-start, Turn-on Turn-off transients, Multing at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™, PMS™ and SSP™

More features

DSP specifications

Overall:

  • High performance 96 KHz/24 bits AD/DA converters
  • 64 bit double-precision 96 KHz DSP process
  • 0.85 ms minimum process latency time
  • Custom FIR process up to 1000 taps
  • Dante and AES3 input versions

Input Section (x4):

  • Gain, Mute and Phase inversion
  • Input Delay: Up to 114 meters (333 ms)
  • Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)

Output Section (x4):

  • Crossover Filters: FIR and IIR (up to 48dB/oct, Butterw./LR/Bessel)
  • Output Delay: 0 to 31 meters (90ms) per channel
  • Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP)
  • Output FIR EQ: 20 filters per channel (Parametric, Shelving, LP,HP, BP, SB, PA), or Custom. Up to 1000 taps
  • RMS and Peak limiter per channel

Communications:

  • Two ports Ethernet switch for daisy chain connection
  • UBS 2.0 Type B port

Miscellaneous:

  • 20 User preset memories library
  • 20 User snapshot memories library
  • Manufacturer/User passwords
  • User control groups for virtual Equalization, Gain and Delay
  • Zone management for library, and alerts information
  • Smaart ® analysis software integration
DSP management using OCS and amplifier display
  • System Preset selection predefined by the manufacturer (Locked/Unlocked)
  • Snapshot library management up to 20 presets
  • Master control groups
  • Input Routing matrix Analog/Dante/AES3
  • Input EQ section with 8 filters and 20 memories
  • Input EQ User section, predefined by the manufacturer

Home screen

Main screen with the following options:
· Signal Limit level
· Output device level
· Temperature level
· Clip indicator
· Mute button / Channel output signal
· Select system, use and way name
· User output name label

DSP Edit screen
Screen to load System Presets and USES and to change User EQ, following options are listed:

· Input source select
· Input channel select
· User input name label
· Input process select
· User EQ select
· Group process values
· Channel Join
· System select
· Use select
· Way select

User EQ screen
Screen to change User Gain and Delay, following options are listed:

· Input level process
· Select user input gain
· Select user delay value
· Input mute
· Input Signal Polarity
· User EQ adjust per channel

EQ screen:
Screen to access and modify the User EQ, following options are listed:

· 6 parametric EQ
· High-pass filter
· 16 EQ types selection
· Gain, Q and Frequency control
· General EQ Bypass

Downloads

Other amplifiers

Touring Amps

hpx-front-back

2 & 4 Channel

High Power