GXR-LA210A

Powered line array

Compact, self-powered class D, two way line array equipped with two 10″ speakers (2″ voice coil). For the High frequencies it uses a 1.4″ output compression driver coupled to a waveguide (100°H x 10°V). It delivers high power levels from a very compact format.

Also available in bi-amp.

Where to buy

Description

The GXR-LA210A is the ideal solution for install projects and live events where a powerful but compact line array is required.

The GXR-LA210A is a self-powered (Class D), two-way enclosure that delivers high power levels from a very compact format. It uses two 10″ (2″coil) speakers for the Low/Mid frequencies. For the high frequencies it uses a 1.4″ output compression driver coupled to a waveguide offering 100° H x 10° V coverage.

The system is very easy to use and can be controlled without the need for any external amps. To extend the low frequency response there are 2 options. The GXR-D15A is designed to be flown or stacked in perfect combination with the GXR-LA210A and when extreme low frequencies are required, the GXR-D18A is recommended.

The GXR-LA210A has a selection of rigging hardware & accessories available: Flying frame, transport dolly, nylon protection cover, rain hood, etc.

N

Perfectly suited for:

→ Outdoor events
→ Houses of worship
→ Auditoriums
→ Large stadiums / arenas
→ Interior live PA
→ Theatres

Technical Data

Components	LF: 2 x 10″, 2″ voice coil, Malt Cross Cooling System
	HF: 1.4″ exit throat, 3″ voice coil with titanium diaphragm
Frequency Range	60 Hz – 20 KHz (-10dB)
Frequency Response	68 Hz – 18 KHz (± 3dB)
Max SPL	135dB
Coverage Angle	100º H x 10 º V
Power	1400W Class D with switching power supply & PFC
LF Amplifier	1 x 800 W RMS, 1600 W peak
HF Amplifier	1 x 600 W RMS, 1200 W peak
Processing	Internal Lynx Processor DSPB-FL. 96 KHz / 64 bit double-precision, DSP with FIR filter linear phase
Control	User control interface with 2.8″ IPS screen
Control Connections	Ethernet (OCS) / USB (DSP updating)
Input	Analog / AES3 (optional)
AC Power	90 – 264V. 50/60 Hz with PFC
AC Connections	16A Neutrik powerCon TRUE1 TOP with looping output
Finish	Polyurea coating, black colour
Material	15 mm premium birch plywood
Dimensions	298 x 790 x 436 mm (H x W x D)
Weight	31 kg (68.2 lbs)

DSP configuration

DSP module configuration panel

On the back pannel of the cabinet you will find the digital control area. From the compact joystick located below the screen you are able to configure the basic adjustment functions of the internal DSP.

Just move the joystick to select the icons on the left of the screen. You can enter into the following functions: Home, settings, folder, configuration and information. Please note that you must apply the desired configuration in each one cabinet and requires electrical power to work.

If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not wanted. To re-activate the light simply press the joystick.

The following screens are an example and may vary slightly for each cabinet.

Configuration panel:

	HOME On the main screen you can see the cabinet’s input and output: • Input: You can see a vumeter with the input level and a clip signal. • Output: You have a vumeter with the output level (0 dBu is the amp’s maximum level) You can check the compressor and control the dynamic activity.
	SETTINGS This panel allows you to change the gain, polarity, mute and the delay for the inputs. You also have the possibility of putting a high pass, changing the type of filter, frequency and order.
	FOLDER The folder screen shows you the name of the preset and its description. Using the joystick you can change the preset.
	CONFIGURATION This screen is to configurate Ethernet. You can choose automatic or manual. You can also configure the screen saver. And here you have the input selection. You can choose between analog or AES3 for channel 1 or channel 2.
	INFORMATION The last screen shows you some general information regarding the cabinet’s components. Here you can see the cabinet model, its serial number, DSP firmware and hardware versions, amp module model with hardware version, as well as the accelerometer status.

Watch the following TUTORIAL to understand how it works:

DSP module configuration panel

On the back panel of the cabinet you will find the digital control area. From the compact joystick located below the screen you are able to configure the Basic adjustment functions of the internal DSP.

Just move the joystick to select the icons on the left of the screen. You can enter into the following functions: Home, settings, folder, configuration and information. Please note that you must apply the desired configuration in each one cabinet and requires electrical power to work.

If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not wanted. To re-activate the light simply press the joystick.

The following screens are an example and may vary slightly for each cabinet.

HOME

On the main screen you can see the cabinet’s input and output.

• Input: You can see a vumeter with the input level and a clip signal.

• Output: You have a vumeter with the output level (0 dBu is the amp’s maximum level) You can check the compressor and control the dynamic activity.

SETTINGS

This panel allows you to change the gain, polarity, mute and the delay for the inputs.

You also have the possibility of putting a high pass, changing the type of filter, frequency and order.

FOLDER:

The folder screen shows you the name of the preset and its description.

Using the joystick you can change the preset.

CONFIGURATION:

This screen is to configurate Ethernet. You can choose automatic or manual. You can also configure the screen saver.

And here you have the input selection. You can choose between analog or AES3 for channel 1 or channel 2.

INFORMATION:

The last screen shows you some general information regarding the cabinet’s components.

Here you can see the cabinet model, its serial number, DSP firmware and hardware versions, amp module model with hardware version, as well as the accelerometer status.

Watch the following TUTORIAL to understand how it works:

More features

Hardware for GXR-LA210A

	Enclosure The GXR-LA210A cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with high-resistant water based black paint.
	Internal design The internal structure of the GXR-LA210A is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability.
	Rear panel The powder coated steel rear panel contains all connections and houses the GXR-LA210A amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency.
	Grill The GXR-LA210A has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.
	Handles Two handles are located on each side of the GXR-LA210A enclosure to facilitate transport, positioning and loading of the cabinets.
	Rigging Built-in flying points are located on each side of the enclosure, to link the cabinets together. The rear pannel integrates the flying hardware in order to splay angles, from between 0° to 10° with 1° step increments to create the desired curve.
	Transport The cabinet is easy to transport thanks to its dedicated dolly and a protective nylon cover is also available to protect the enclosure and keep it clean on tour.

Backpanel detail

Click to expand.

Accessories for GXR-LA210A

	SV-GXR Flying frame and stacking system for GXR-LA210A/GXR-D15A You can use this frame for ground stack or rigging.
	FC-GXRLA210 Flight case for GXR-LA210A
	CA-GXRLA210 Transport dolly for GXR-LA210A
	FD-GXRLA210NL Rain cover for the back panel of the GXR-LA210A
	FD-GXRLA210 Nylon protection cover for either 4 GXR-LA210A cabinets
	GXR-GSKIT Ground stack kit to stack GXR-LA210A directly or together with the GXR-D18S



Downloads

b

Software

GXR-LA210P – Passive Option

Specifications

Components	LF: 10”, 2” voice coil, Malt Cross Cooling System HF: 1.4” Exit throat, 3” voice coil with titanium diaphragm
Frequency Range	55 Hz – 20 KHz (-10dB)
Frequency Response	65 Hz – 18 KHz (± 3dB)
Sensitivity	LF: 99 dB HF: 109 dB
Max. SPL / Peak*	LF: 127 dB / 133 dB HF: 128 dB / 134 dB
Rated Power	LF: 600W AES, 1200W program, 2400W peak HF: 80W AES, 160W program, 320W peak
Coverage	H: 100ºV: depending number cabinets of array
Crossover	Electronic FIR filters linear phase
Nominal Impedance	Low 8 Ω High 16 Ω
Connectors	2 x Neutrik NL4
Finish	Polyurea coating
Material	15 mm premium birch plywood
Dimensions	299 x 790 x 436 mm (H x W x D)
Weight	29 Kg (63.9 lbs)

*Calculated maximum SPL based on rated peak power and measured sensitivity.

Datasheet

Download here

The GXR-LA210P (Passive) is a high output, compact bi-amp line array module. Consists of 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver.

Depending on the configuration, the system is amplified with the GTX Series, 4-channel, extremely high power level amplifiers with outstanding, high efficiency. They come equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface.

Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired. Optional Dante Networking (AES67) and AES3 Digital inputs are also available.