ADP-26

First class powered cabinets

High Output, self-powered (Class D switch mode power supply), two-way cabinet.
Consists of two 6″ (1.5″ voice coil) neodymium magnet transducers with aluminium demodulating rings and a 1″ compression driver with titanium diaphragm, mounted on a 90ºH x 60ºV rotatable, exponential horn.
DSP (FIR technology) controlled with 1000W amplification, 127dB SPL.

Description

The versatile ADP-26 is part of the ADP Self powered, DSP integrated Series. It has been designed to offer the utmost sound reinforcement reliability, incorporating the latest acoustical and electronical technology and delivering incredible, dynamic sound.

The ADP-26 is an extremelly high power, two way full range cabinet providing exceptional performance. Each cabinet has a DSP integrated for system protection and optimization. This DSP applies linear phase (FIR) and classical crossovers. Other features include temperature sensor, fan speed control, Ethernet options and many more.

The compact ADP-26 has an unbeatable power to size ratio, there is no need for external amplification racks, is very light weight and is the ideal solution for portable or fixed sound reinforcement. A variety of rigging options make the ADP-26 easy to set-up in minimal time. To extend the low frequency response, the ADP-18S subwoofer cabinet can be used.

N

Perfectly suited for:

→  Theatres & auditoriums
→  Houses of worship
→  Small / middle sized clubs
→  Smaller Live stages / events
→  Front fill / side fill reinforcement
→  Portable sound reinforcement

 

Technical Data

 

Components
LF/MF: 2 x 6″ neodymium (aluminium demodulating rings)
HF: 1″ titanium diaphragm driver
Frequency Range 65 Hz – 20 KHz (-10dB)
Frequency Response
75 Hz – 18 KHz (± 3dB)
Max SPL 124 dB / 127 dB peak
Coverage Angle
90º H x 60º V rotatable horn
Power 1000 W Class D
LF/MF Amplifier
1 x 500 W
HF Amplifier 1 x 500 W
Processing
Internal Lynx Processor DSPB-FL.
96 KHz / 64 bit double-precision, DSP with FIR filter linear phase.

High performance 32 bit 96 KHz AD/DA converters 120 dB

Control
User control interface with 2.8″ IPS and multifunction joystick controller
Control Connections
USB (DSP programming)
Dual Ethernet port, Online Control System
AC Power 230V / 115V selectable. 50/60 Hz 5A
AC Connections
16A Neutrik powerCon TRUE1 with link output
Finish Polyurea coating
Material
15 mm premium birch plywood
Dimensions 530 x 222 x 269 mm (H x W x D)
Weight
13kg (28 lbs)

More features

Hardware for ADP-26

Enclousure-adp-26

Enclosure

The ADP-26 cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating

ADP-int

Internal design

The internal structure of the ADP-26 is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws. The amplification modules & DSP are housed in a separate chamber to the drivers avoiding excessive heat & vibration, thus delivering greater efficiency and reliability.

Rearpanel-adp-26

Rear panel

The powder coated steel rear panel contains all connections and houses the ADP-26 amplification modules and DSP, is easily accessible and housed separately from the drivers for increased reliability and efficiency

Grill-adp-26

Grill

The ADP-26 has a heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.

Components
Speaker-adp-26

For the low-mid frequencies it uses one 12” (4” interleaved sandwich voice coil) neodymium transducer with nomex cones and suspension.

For the low-mid frequencies it uses dual 6” (1.5” copper voice coils) neodymium transducers with aluminium demodulating rings considerably reducing distortion.

The high frequencies are looked after by a compression driver with a 1.7″ aluminium voice coil, titanium diaphragm mounted on a 90º x 60º aluminium rotatable exponential horn.

Transducer and driver with neodymium magnet groups. Copper voice coil and Aluminium demodulating ring considerably reducing distortion, weather protected membrane for outdoor use.

Titanium diaphragm for the HF driver increasing the life of the components with aluminium voice coil and shorting copper cap for extended HF response mounted on a 90º x 60º aluminium rotatable horn.

Accessories for ADP-26
AGR-6
AGR-6
M6 eye bolt for the ADP-26
VSM-V1
VSM-V1
35mm speaker mounting top hat for ADP-26 with the ADP-18S or ADP-12S
Wb-03
WB-03
Wall bracket for the ADP-26 for top hat insertion

 

Amplification & DSP
Bi-amplified Class D with switching power supply. Includes one 750W power module for the 6” transducers and another 750W power module for the HF driver.
 
The amplification far exceeds the transducer needs thus resulting in high output, high damping factor and extremely low levels of distortion.

Other products from this series

1 x 15” transducer with a 1.4” driver, 136 dB peak

1 x 12” transducer with a 1.4” driver, 136 dB peak

2 x 12” transducers with a 1.4” driver, 139 dB peak

1 x 12” transducer with a 3” driver, 132 dB peak

1 x 15” transducer with a 1.4” driver, 133 dB peak

1 x 12” transducer, 134 dB peak

1 x 18” transducer, 136 dB peak

Featured references

Live performances in Jerusalem Club

In the heart of the city of Valencia is the Jerusalem Club, one of the most popular halls of the Valencian night and perhaps the most musically diverse…

Read more

Latest installations in China by Beijing Xi Ya Linke

Here we present some of the latest installations from Beijing Xi Ya Linke, in China. Lynx Pro Audio’s professional sound systems have been permanently installed…

Read more

Seoul’s National Maritime Museum

The Seoul’s National Maritime Museum is the third lagest museum in South Korea. The museum was inaugurated on July 9 (2012) and is located in….

Read more

Multisports Vechtehalle in Schüttorf, Germany

Multisport Hall, house of the German Bundesliga Schüttorf Volleyball club. The club’s own Holmers-Kamp Stadium on Salzbergener Straße, which is managed by the city of Schüttorf, holds 5,000 spectators….

Read more