Support

CPS SERIES

Coaxial Point Source

The CPS (Coaxial Point Source) Series is Lynx Pro Audio’s high-output point source loudspeaker range, designed to deliver controlled coverage, high speech intelligibility and consistent acoustic performance across professional sound reinforcement applications.

The series combines coaxial transducer technology with compact enclosure designs and flexible system configurations. The range includes full-range loudspeakers, subwoofers and a dedicated stage monitor, offering solutions for both fixed installations and live sound applications.

Selected self-powered models integrate Class D amplification and digital signal processing (DSP), combining acoustic design, electronics and system protection to optimise loudspeaker performance and system operation.

The CPS Series is supported by Lynx Pro Audio’s software ecosystem. Rainbow 3D provides electro-acoustic prediction and system design capabilities, while OCS (Online Control System) enables configuration, monitoring and control of compatible systems.

Suitable for:

CPS-214 (64 / 96)

2 x 14″ + 1 x 2″ dual diaphragm coaxial driver, 6000W Class D

CPS-210 (64 / 96)

2 x 10″ + 1 x 1.4″ coaxial driver, 3000W Class D

CPS-14 (64 / 96)

1 x 14″ + 1 x 1.4″ coaxial driver, 3000W Class D

CPS-5

1 x 5″ passive coaxial speaker , 150 W, 120 dB SPL

CPS-4

1 x 4″ passive coaxial speaker, 100 W, 112 dB SPL

CPS-18S

1 x 18″ transducer, 3000 W Class D, 132 dB SPL

CPS-F10S

1 x 10″ + 2’5 voice coil, 600 W, 119 dB SPL

CSM-210

2 x 10″ + 1.4″ coaxial driver, 3000W Class D 131 dB SPL

Digital processing

Active models have a DSP integrated into each cabinet. This DSP, with double precision filters, 64bit internal processing and double dynamics (RMS & Peak) optimizes all the system components and electronics, providing maximum system efficiency and total protection whilst significantly and noticeably lowering distortion.

Self-powered

Active CPS cabinets include class D amplification, with switching power supply. The integrated amplification far exceeds the transducers’ needs thus resulting in high output, high damping factor and extremely low levels of distortion.

They are also equipped with energy saving PFC (Power Factor Correction). The power supply regulates itself when AC mains change, so the amp power output will not change with mains swinging. It reduces the current draw in 40% approximately.