Support

Lynx Pro Audio > LAIA Series > LAIA-210P

LAIA-210P

Coaxial Linear Array Module

High Output, line array element. It consists of a 2 x 10” (2” voice coil) transducer with 1.4” exit throat driver with waveguide system delivering 100ºH x 10ºV precise coverage. 138 dB peak.

The LAIA-210P enclosure is a medium format Line Array module that offers an ideal solution for a wide variety of indoor and outdoor applications where a compact, practical and reliable Line Array system is required.

Depending on the configuration, the system is amplified with the GTX Series, 4-channel, extremely high power level amplifiers with outstanding, high efficiency.

They come equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface.

Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired.

Outdoor events
Theatres
Large stadiums / arenas
Auditoriums
Indoor live PA
Houses of worship

Two Way Passive / Bi – Amp
GTX / Luka optimized presets
FIR linear phase filtering
Extraordinary power-to-size ratio
Perfect acoustical coupling of individual units to create virtually continuous line source & excellent phase coherence
Ergonomic design in premium birch plywood & finished in polyurea

Components

LF: 2 x 10”, 2” voice coil, Tetracoil ultra linear motor
HF: 1 x 1.4” exit throat, (3” voice coil) with titanium diaphragm

Frequency range

55 Hz – 20 KHz (-10 dB)

Frequency response

65 Hz – 18 KHz (± 3dB)

Impedancia

Low Section: 8 Ω
High Section: 8 Ω

Max SPL

132 dB / 138 dB Peak

Coverage

100º H x 10 º V

Sensitivity

LF: 95 dB
HF: 106.5 dB

Power

Passive mode: 700 W (1400 W program, 2800 W peak)
Bi- Amp LF: 700 W (1400 W program, 2800 W peak)
Bi-Amp HF: 110 W (220 W program, 440W peak)

Connectors

2 x Neutrik Speakon NL4MP

Finish

Polyurea coating, high grade resistant paint

Material

15 mm Premium birch plywood

Dimensions

303 x 749 x 473 mm (H x W x D) without pins

Weight

27 Kg (61.72 lbs)

More features

Hardware for LAIA-210P

Enclosure

The LAIA-210P enclosure is made of 11-ply premium birch plywood (15 mm thick) and finished with a polyurea coating.

Internal design

The internal structure of the LAIA-210P is heavily reinforced to ensure greater durability, and all parts are assembled using metal inserts and metric fasteners.

Grill

The LAIA-210P features a heavy-duty, powder-coated front grille and a special acoustic fabric on the back to protect the transducers from dust and dirt.

Handles

The LAIA-210P features four ergonomic handles with a secure internal grip to facilitate transporting, positioning, and loading the enclosures.

Rigging

The 3-point rigging system, featuring 2 retractable levers and 1 central/rear point, allows for the suspension of up to 16 LAIA-210 enclosures in a single array. The opening angles are selectable between 0° and 10° in 1° increments to create the desired curvature. The system can also be angled in the stowed (retracted) position, allowing for much easier setup without having to lift each enclosure individually.

Accesories for LAIA-210P