Extremely compact & powerful 3-way, biamplified coaxial line array element. Dual high power 10” neodymium transducers and a unique 10” dual diaphragm coaxial planar wave driver.
The CLS-210P is an extremely compact, high-output, three-way, bi-amplified symmetrical coaxial line source element, designed for medium-sized touring applications and fixed installations.
For the low frequencies, it uses two custom low-distortion 10” loudspeakers with dual 88 mm (3.5”) voice coils, exclusive Malt Cross cooling technology, an FEA-optimised neodymium magnetic circuit, a demodulating ring and a waterproof cone.
For the mid and high frequencies, it incorporates an ultra-light 10” dual-diaphragm coaxial planar wave driver. Its voice coil technology uses lightweight copper-clad aluminium wire, wound inside and outside the Kapton former to improve heat dissipation. This increases acoustic output and driver reliability while reducing power compression.
The larger annular diaphragm reproduces the mid frequencies, while the ultra-light annular high-frequency diaphragm provides excellent transient response and high efficiency. This configuration allows each subsystem to operate over a narrower frequency range, increasing power handling and dynamic capability while maintaining very low distortion. It also delivers excellent phase coherence and time alignment, avoiding the interference issues associated with multiple sources. With the midrange section extending down to 550 Hz, the CLS-210P provides 100° constant-directivity horizontal coverage.
Depending on the configuration, the system is powered by GTX Series amplifiers, featuring four channels of high-power, high-efficiency amplification. They incorporate 96 kHz FIR-DSP processing and a large IPS touchscreen interface.
The GTX Series features advanced power management, allowing users to configure power distribution between channels via the DSP, with the option to concentrate maximum power into a single channel. Optional AES67 networking and AES3 digital inputs are also available.
The enclosure is manufactured from premium birch plywood with a polyurea coating, providing increased durability and weather protection.
Dedicated accessories are available, along with a three-point rigging system featuring two automatically rising front plates and one central rear point, allowing up to 16 CLS-210P cabinets to be flown in a single array. The system also allows cabinets to be connected and their splay angles adjusted in the retracted position, simplifying setup without having to lift each cabinet individually.
Perfectly suited for:
• Extraordinary power-to-size ratio
• Unique 10” dual diaphragm planar wave driver
•Perfect acoustical coupling of individual units to create virtually continuous line source & excellent phase coherence
• Extended bandwith (55 Hz – 22 KHz)
• Perfect Time Alignment avoiding Multi-Source Interference problems
• Ergonomic design in premium birch plywood & finished in polyurea
55 Hz – 22 KHz (-10dB)
65 Hz – 20 KHz (± 6dB)
110º (-10 dB), 100º (-6 dB)
Single element 10º
2 x Neutrik Speakon NL8MP
Black Polyurea coating, high grade resistant paint. other colours (RAL) available
15 mm Premium birch plywood
302 x 800 x 479 mm (H x W x D)
33 Kg (72.75lbs)
The CLS-210P cabinet is constructed from 11-ply premium birch plywood (15mm thickness) and finished with polyurea coating
The internal structure of the CLS-210P is heavily braced for greater longevity and all parts are assembled on metal inserts with metric screws.
The CLS-210P has two heavy duty, powder coated front grille with a special acoustic rear fabric to protect the transducers against dust and dirt.
The CLS-210P has four ergonomic handles with firm internal grip to facilitate transport, positioning and loading of the cabinets. Two handles are placed at the rear of the cabinet and two L-shaped are located on the sides.
The 3 point rigging system with 2 front retractile levers and 1 centre/rear point enables up to 16 CLS-210P cabinets to be flown in a single array, with optional splay angles, from between 0º to 10º with 1º step increments to create the desired curve.
The system can also be rigged and angled in retracted position enabling a much easier set-up without the need to lift each cabinet individually.
The CLS-210P is easy to transport thanks to its dedicated flight case where it can be stowed in rest position. With craddle option: no need to lock pins.
Flying frame for 16 CLS-210P or 8 CLS-118SP.
Máx. 600 Kg
Connection system for CLS-210P together with CLS-118SP.
Connection system for CLS-212P o CLS-210P together with CLS-28P.
Kit to connect SV-CLS10 or SV-CLS20 flying frame and M20 plate.
4 x ground stack stabilisers for SV-CLS10.
Flight case to transport 2 SV-CLS10, cables and accessories.
Ball pin with thread for CLS-210P cabinet and CLS-118SP.
Transport rack 10 units
Calle 1, Pol. Ind. Picassent. 46220 Picassent. Valencia
Subscribe to our newsletter and receive information about products, our latest facilities, and other news.
Copyright © LYNX PRO AUDIO